What Are Customers' Requirements For The Appearance Of Luxury Cosmetic Container

luxury cosmetic containers

Since it is need to daub on the body, then we'd have to do from the beginning of packing is convenient, the details of each step and design, and to guarantee the safety of its in cosmetics and closeness, so today we will take you to see our HaoJing glass products co., LTD., for our luxury cosmetic containers（Details/Inquiry​） manufacturing of some cosmetic requirements.

Appearance requirements of luxury cosmetic containers:

1、No rust, oil or water stains are allowed. No foreign matters such as paper scraps, insects, hair, broken glass, metal or a lot of dust are allowed in the bottle.

2、 Bottle mouth without big mouth, small mouth, crack, damage, burr; No obvious tilt or displacement of the bottleneck, affecting the filling and compatibility.

3、Thread must be smooth, without deformation, incomplete, rough phenomenon.

4、 Die line should not protrude obvious, double die line dislocation and sharp burr affect the safety and compatibility.

5、The bottom of the bottle has no concave and convex deformation and affects the stability.

6、The thickness of the bottle body should be within the receiving range, and the thickness should not be less than 1.5mm. All parts of luxury cosmetic containers should be free from cracks, cracks and damage.

7、 The main viewing surface is allowed with φ ≤0.5mm I or 2 non-centralized points without affecting LOGO and layout; Two or three non-focus points with φ ≤0.5mm are allowed for non-main view but do not affect the layout.

8、 The main viewing surface allows 1 or 2 bubbles with φ ≤0.5mm but does not affect the LOGO and layout; Non-main view allows φ ≤1mm under 3 bubbles and does not affect the layout; But no broken bubbles are allowed.

9、 The main viewing surface is allowed with φ ≤0.5mm I or 2 sand holes without affecting the LOGO and layout; Non-main view allows φ ≤1mm less than 3 sand holes and does not affect the layout.

10、 The surface thickness is appropriate, the thickness is moderate, the coated position generally does not rise to the bottom of the thread, not lower than the bottleneck and the bottle body junction, the bottle body front is not allowed to have bright spots, the side is not more than 0.8mm bright spot 5, the bottom is not more than 1.0mm bright spot 5.

Of course, in order to better ensure the use of luxury cosmetic containers and its efficacy, we do a good job in the production of its appearance design.