High Borosilicate Glass Bottles Are Afraid Of Hot Water And Cutting Glass Skills

glass bottles suppliers     glass bottles custom

Are high borosilicate glass bottles afraid of hot water? In fact, in order to figure out whether high borosilicate glass bottles will change after high temperature, then we must first understand the production process of high borosilicate glass bottles, maybe everyone's impression of high borosilicate glass bottles (See more glass bottles​) stays in the high price of glass bottles, and the high price is also has the advantage of other packaging containers.

High borosilicate glass bottles raw material is made of high borosilicate glass, high borosilicate glass is the use of glass in high temperature conditions conductive properties, through internal melting glass, then through advanced production technology and production molding, we can see the high borosilicate glass as raw materials of glass bottle, including the characteristics of the larger is the instantaneous temperature difference.

So then somebody says, what is instantaneous temperature? Instantaneous temperature difference is commonly said to take the glass bottle out of the freezer, immediately filled with just opened hot water glass will not break, minus 20 degrees to zero 130 degrees is no problem, can also be directly into the microwave, and can be placed on an open fire dry burning 20 minutes without a problem.

Usually high borosilicate glass bottles can withstand high temperature about 160 degrees of instant temperature difference, when the temperature reaches more than 400 degrees to the softening point of temperature, will begin to deformation, but will not burst, we are not for high borosilicate glass bottles and a little more understanding of it.

Self - cutting glass bottles are using the principle of expansion and contraction.

One, oil cotton thread heating method: bottle, glass knife, cotton yarn, gasoline or oil, bucket, etc., 1. Use a glass knife to make a scratch on the cut area of the glass bottle, 2. Tie a piece of oil-soaked yarn into the groove of the scratch, 3. Point the yarn. When the fire subsides, plunge the bottle straight into cold water. 4.The bottle will be broken when you pull it off by hand.

Two, Electric furnace wire heating method: bottle, electric furnace wire, transformer, bucket, etc. 1. Wrap the electric furnace wire that is slightly good at the circumference of the bottle around the part that needs to be cut, and connect the low-voltage electric heating for 10 minutes. 2. Immediately put the bottle straight into the cold water, can also use cold water from the top, the bottle is disconnected.