WHO WE ARE? MANUFACTURER & PACKAGING SOLUTIONS PROVIDER

Industry News

What Is The Cleaning Procedure For An Essential Oil Dropper Bottle?

Published by Haojing 2022-12-27

How to clean the essential oil dropper bottle and what are the removal steps? Essential oil dropper bottle many common tools that you use every day must be removed. For some objects, it is very troublesome to remove them when they want to be replaced after using them, and they always feel that they are not clean. For some essential oil dropper bottles, it is more difficult to wash them, and the smell cannot be removed. So specifically how to remove it, the following look at the glass bottle manufacturer method process:

glass essential oil dropper bottles

1. When the essential oil dropper bottle is used up, put it on the cap with a piece of paper with good water absorption capacity, stand up upside down and put it on it for about 24 hours. The rest of the oil will drip down.

 

2, and then use medical tweezers to clamp the oil suction paper to clean the inner oil dropper bottle once, and then wipe it again with handkerchief paper, which is close to wiping down the dirt on the surface.

essential oil bottle

3, add water with the agent that wash clean, pour into essential oil dropper bottle next, cover tight bottle cork to shake next, place next 15 minutes fluctuation, throw away, put water again next, that kind ceaselessly after 3 times, use water of life to flush clean and neat.

small essential oil dropper bottle

4. Finally, wipe the inner cavity of the refined oil bottle with toilet paper, open the bottle cap and put it into the prompt box or indoor ventilated area to circulate air. If there is a shortage, you can also blow with a hair dryer immediately, but pay attention not to use too hot wind.

clear essential oil dropper bottle

It is also necessary to pay attention to the essential oil dropper: the refined oil bottle and the dropper can be washed with hand sanitizer. There is a long thin soft brush to remove the dropper. In the case of removing the dropper, the infiltration method can be used to put some broken surface paper in the water, and gently touch the plastic head many times.

 

Then soak for a while, and then constantly, generally can be cleared clean and tidy.

Technical Support: Magic Lamp