Several Methods To Identify The Quality Of Acrylic Jar Materials

Acrylic, also known as PMMA or plexiglass, derived from English acrylic, chemical name is polymethyl methacrylate. It is an important plastic polymer material developed earlier, with good transparency, chemical stability and weather resistance, easy to dye, easy to process, beautiful appearance, widely used in the construction industry. A good acrylic material determines a high quality acrylic jar, it is obvious that if you choose inferior acrylic materials processed out of the acrylic jar will be deformed, yellowing, black or processed out of the acrylic products a lot of inferior products. These problems are directly related to the choice of acrylic materials. Here to introduce several ways to judge the quality of acrylic jar, for everyone to identify in the future.

Acrylic jar

The first observation method: This is based on the characteristics of acrylic jar material itself to determine a method, we can see in acrylic when the choose and buy acrylic sheet have faded a bit serious or gloss is not high, if there are suggesting that acrylic quality is bad, in addition to the method of observation can also see illustrations of the acrylic are consistent with the actual situation of acrylic, If inconsistent can also be judged acrylic material is not normal.

Second combustion method: you can use a very small piece of acrylic burning experiment, if the acrylic plate will soon burn up that acrylic quality is not good.

Third transmission method: this method is to use the acrylic light transmittance characteristics derived method, can use the light is white light through the acrylic plate, if it is found that color is yellow or blue, explain quality of acrylic, because of the high light transmittance of acrylic and belong to the white light, light penetrates after will not absorb the light color.

The fourth paste method: this method is also called hot melt method, it is the use of good acrylic material and bad acrylic material paste degree is not the same and distinguish. For example, the yakeli material with poor quality is hot after melting can stick together and part hard, yakeli with good quality is parted easily

Fifth packaging method: good quality acrylic material soft plastic edge packaging is very good, bad acrylic plate soft plastic edge looks very mixed color, this industry called joint venture plate, of course, the packed acrylic sheet in the price is certainly more expensive than the acrylic.

When we produce acrylic jar, we use these identification methods to ensure the quality of our raw materials. It is also the five methods to identify the quality of acrylic in sheet metal summarized in practice over the years. At the same time, we hope to be corrected or supplemented by peers or experts.